CNC Machines Services

R

Quality

R

Excellent Customer Service

R

Innovation

                                  

EDM DIE SINKING

Die-sinking EDM, also called cavity type EDM or volume EDM, consists of an electrode and workpiece submerged in an insulating liquid such as, more typically, oil or, less frequently, other dielectric fluids.  The electrode and workpiece are connected to a suitable power supply. The power supply generates an electrical potential between the two parts. As the electrode approaches the workpiece, dielectric breakdown occurs in the fluid, forming a plasma channel, and a small spark jumps.

 

 

          

EDM WIRECUT

EDM wire cutting uses a metallic wire to cut a programmed contour in a workpiece. Extrusion dies and blanking punches are very often machined by wire cutting. Cutting is always through the entire workpiece. To start machining it is first necessary to drill a hole in the workpiece or start from the edge. On the machining area, each discharge creates a crater in the workpiece and an impact on the tool. The wire can be inclined, thus making it possible to make parts with taper or with different profiles at the top and bottom. There is never any mechanical contact between the electrode and workpiece. The wire is usually made of brass or stratified copper, and is between 0.1 and 0.3 mm diameter.

 

           

CNC MACHINING

Tools (drills, boring tools, lathes) by means of a computer, in which a CNC machine operates on a piece of material (metal, plastic, wood, ceramic, or composite) to transform it to precise specifications. CNC machines combine a motorized maneuverable tool and often a motorized maneuverable platform, which are both controlled by a computer core, according to specific input instructions. Instructions are delivered to an CNC machine in the form of graphical computer-aided design (CAD) files, which are transformed into a sequential program of machine control instructions, and then executed.

 

CNC TURNING

CNC Turning is a manufacturing process in which bars of material are held in a chuck and rotated while a tool is fed to the piece to remove material to create the desired shape. A turret (shown center), with tooling attached is programmed to move to the bar of raw material and remove material to create the programmed result. This is also called “subtraction machining” since it involves material removal. If the center has both tuning and milling capabilities, such as the one above, the rotation can be stopped to allow for milling out of other shapes.

 

 

 

 

 

We work hard to give you the best in quality and service

Call Now Button